encoder suitability
Moderator: cnckeith
-
- Posts: 72
- Joined: Wed Sep 27, 2017 3:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: The Netherlands
Re: encoder suitability
I assume if the encoder is not genuine then all the Chinese sellers on Ebay sell the same fake item. I am curious if my assumption is correct, so I also ordered an encoder from the seller where Marty ordered. Let's see if I can see any differences, I will post pictures when I receive the encoders in about 3-6 weeks.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: encoder suitability
OK, I ordered the Omron E6B2CWZ1X 2000P/R from this listing: http://r.ebay.com/OpwkLX. I just got confirmation that it has shipped via Epacket (a little faster than their standard shipping) When it arrives I will take a look at it and give it a test and report back.
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 72
- Joined: Wed Sep 27, 2017 3:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: The Netherlands
Re: encoder suitability
I just received confirmation from both sellers that they have shipped the encoder to me. Now waiting for delivery.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: encoder suitability
Just remember, this is an experiment at this point. No telling what we will get and or whether or not they will work. They should.....
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 203
- Joined: Wed Oct 11, 2017 12:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: encoder suitability
I e mailed the seller I bought from to ask if they were genuine omron - no reply!
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: encoder suitability
They are knock offs I'm sure
Digikey ($510.91):
https://www.digikey.com/product-detail/ ... ND/2670649
Mouser ($336.58):
http://www.mouser.com/ProductDetail/Omr ... fTJw%3D%3D
All a great big risk.....
Automationdirect.com folks....cry once by once.....
Marty
Digikey ($510.91):
https://www.digikey.com/product-detail/ ... ND/2670649
Mouser ($336.58):
http://www.mouser.com/ProductDetail/Omr ... fTJw%3D%3D
All a great big risk.....
Automationdirect.com folks....cry once by once.....
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 72
- Joined: Wed Sep 27, 2017 3:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: The Netherlands
Re: encoder suitability
After receiving both encoders, I will first post some images on the forum, to see if we can find some differences, and I will absolutely not just connect one of the encoders to the board.
I am not the technician who can test the encoders. I first need to find somebody who is able to do some testing, or make some test setup. I am not sure if I can use an arduino board to do some testing?
I am not the technician who can test the encoders. I first need to find somebody who is able to do some testing, or make some test setup. I am not sure if I can use an arduino board to do some testing?
-
- Posts: 595
- Joined: Tue Sep 12, 2017 10:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1030090099
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Outside Winston-Salem, NC
- Contact:
Re: encoder suitability
I agree Marty.martyscncgarage wrote: ↑Mon Oct 16, 2017 3:17 pm They are knock offs I'm sure
Digikey ($510.91):
https://www.digikey.com/product-detail/ ... ND/2670649
Mouser ($336.58):
http://www.mouser.com/ProductDetail/Omr ... fTJw%3D%3D
All a great big risk.....
Automationdirect.com folks....cry once by once.....
Marty
The automation direct encoders for $100 or less, they are very well made, and the have a lot of mounting accessories.
I have installed a few, but this is my first opportunity to put one on something of my own doing.
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
-
- Posts: 203
- Joined: Wed Oct 11, 2017 12:20 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: encoder suitability
For what it's worth, the seller "queens land" has assured me they are genuine omron. Easy to say from an office in China though! My problem is I have no idea how to test one anyway. It may be obvious from looking at it may that it's fake? Who knows
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: encoder suitability
Let me take one for the team. ![😀](https://cdn.jsdelivr.net/gh/s9e/emoji-assets-twemoji@11.2/dist/svgz/1f600.svgz)
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ