Page 2 of 3
Re: CNC12 v5.06 has been released.
Posted: Sat Sep 23, 2023 7:12 am
by suntravel
I found a bug in 5.06 Arcor6 lathe.
RTG displays only the x-axis
On first start a lot of lines with Z position...
Uwe
Re: CNC12 v5.06 has been released.
Posted: Sun Sep 24, 2023 2:45 am
by suntravel
Main Screen Lathe is also missing Machine Coord. and G-code.
Mill Acorn is correct.
Re: CNC12 v5.06 has been released.
Posted: Mon Sep 25, 2023 11:25 am
by usinart
Acorn Router does not reconniz my pro *.dat licence .
What to do
license-E415F6F138CC-1119204064-C146XXX -acorn-pro-router
Re: CNC12 v5.06 has been released.
Posted: Mon Sep 25, 2023 4:03 pm
by cnckeith
usinart wrote: ↑Mon Sep 25, 2023 11:25 am
Acorn Router does not reconniz my pro *.dat licence .
What to do
license-E415F6F138CC-1119204064-C146XXX -acorn-pro-router
post a fresh report.zip and the license file.
Re: CNC12 v5.06 has been released.
Posted: Mon Sep 25, 2023 4:03 pm
by cnckeith
suntravel wrote: ↑Sat Sep 23, 2023 7:12 am
I found a bug in 5.06 Arcor6 lathe.
RTG displays only the x-axis
On first start a lot of lines with Z position...
Uwe
whoa! we are on it. thanks for reporting.
Re: CNC12 v5.06 has been released.
Posted: Thu Sep 28, 2023 6:04 pm
by cnckeith
fixed in the latest beta release here.
https://centroidcncforum.com/viewtopic.php?f=67&t=9248
also release candidate for the Centroid CNC PC Tuner dropped today as well.
https://centroidcncforum.com/viewtopic.php?f=67&t=9157
Re: CNC12 v5.06 has been released.
Posted: Mon Oct 02, 2023 4:33 pm
by cnckeith
CNC12 installation instructions have been updated to include all Centroid Hardware that is capable of running CNC12 and a introduction/discussion section has been added.
(Acorn users will be glad to have the Wizard if they read the Oak/Allin1DC/MPU11 sections)
https://www.centroidcnc.com/centroid_di ... ctions.pdf
Re: CNC12 v5.06 has been released.
Posted: Wed Oct 18, 2023 11:48 pm
by kilo7
After installing 5.06 (wpmp-4) on all axis x,y,z has only only one jog speed x1.
x10 , x100 fail to function.
Re: CNC12 v5.06 has been released.
Posted: Thu Oct 19, 2023 12:16 am
by suntravel
kilo7 wrote: ↑Wed Oct 18, 2023 11:48 pm
After installing 5.06 (wpmp-4) on all axis x,y,z has only only one jog speed x1.
x10 , x100 fail to function.
I am sure the probe is tripped, check the input settings.
Uwe
Re: CNC12 v5.06 has been released.
Posted: Sun Oct 22, 2023 1:44 am
by johannes
I get a fatal crash when I exit the Math Help screen:
Steps I use to reproduce:
1. Open either of the canned cycles.
2. Click on
Math Help
3. Once in Math Help, click escape key on keyboard, or click the Esc icon on the screen.
A full software crash every time.
CNC12 Lathe v5.06 on ACORNSIX Lathe Pro
Report file attached.
Kind regards
Johannes