What is the encoder count on the motor?
What do you have set for steps per motor rev in the Wizard?
What voltage are you using to drive the motor?
Help Connecting a JMC Integrated Servo - RESOLVED!
Moderator: cnckeith
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Help Connecting a JMC Integrated Servo
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 349
- Joined: Wed Jan 03, 2018 10:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D2695C8301-0122180576
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: NW Arkansas
Re: Help Connecting a JMC Integrated Servo
1600 both places.
36VDC, the power supply came from the manufacturer.
36VDC, the power supply came from the manufacturer.
Clint in NW Arkansas
The more I learn, the more I realize I don't know...
The more I learn, the more I realize I don't know...
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Help Connecting a JMC Integrated Servo
Unfortunately I am out of ideas as I am unfamiliar with that motor drive.
Is the motor unlocked until you try and command a move?
Marty
Is the motor unlocked until you try and command a move?
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 349
- Joined: Wed Jan 03, 2018 10:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D2695C8301-0122180576
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: NW Arkansas
Re: Help Connecting a JMC Integrated Servo
I GOT IT!!!
In the Configuration Wizard, under Advanced, I inverted the Step signal.
In the Configuration Wizard, under Advanced, I inverted the Step signal.
Clint in NW Arkansas
The more I learn, the more I realize I don't know...
The more I learn, the more I realize I don't know...
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Help Connecting a JMC Integrated Servo
Hey, right on. Thanks for letting us know what you had to do.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 349
- Joined: Wed Jan 03, 2018 10:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D2695C8301-0122180576
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: NW Arkansas
Re: Help Connecting a JMC Integrated Servo - RESOLVED!
These cheap JMC integrated steppers (I thought they were servos, but I was wrong) have worked really well, they have been plugging away for almost a year. This morning I had a crash; the z-axis motor died... There is voltage to the motor, but no power light, no alarm light, it is graveyard dead.
I have a replacement and a spare on order, they will be here Friday. I'm kicking myself; I knew with these cheap motors I should have a spare on hand, Live and learn. I'll be looking at a spare spindle and inverter to have on hand as well.
Maybe its time to start saving up for Clearpath servos.
I have a replacement and a spare on order, they will be here Friday. I'm kicking myself; I knew with these cheap motors I should have a spare on hand, Live and learn. I'll be looking at a spare spindle and inverter to have on hand as well.
Maybe its time to start saving up for Clearpath servos.
Clint in NW Arkansas
The more I learn, the more I realize I don't know...
The more I learn, the more I realize I don't know...
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Help Connecting a JMC Integrated Servo - RESOLVED!
"Buy Once, Cry Once"
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ