Need wiring diagram for Stepperonline drive A6-RS1000H2A1-M14 with Acorn Control

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Centroid_Tech2
Posts: 115
Joined: Mon Mar 03, 2014 4:24 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Need wiring diagram for Stepperonline drive A6-RS1000H2A1-M14 with Acorn Control

Post by Centroid_Tech2 »

Corrected schematic:

https://www.centroidcnc.com/centroid_di ... term=15279
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)

Top
cnckeith
Posts: 8486
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Need wiring diagram for Stepperonline drive A6-RS1000H2A1-M14 with Acorn Control

Post by cnckeith »

chuck, these units have zri can you add how to wire the index pulse so it can be used to set accurate home position?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Acorn CNC Controller”