Accessing Wizard tabs in CNC12 V4.5

[cnckeith]

and post link to photo album of the machine and all its accessories so we know what we are working with here!!

[DLAM]

Here is the report after starting to configure cnc12 v5.10. I am not sure what to do about the ZRI inputs for the home sequence. I also tried to reset Home and was given a drive fault. I will get some pictures of the machine for you.

[DLAM]

SO, when I was going through pictures of the machine to post I found the screen shots and notes I made when first converting the machine back in 2020. I went through wizard and got everthing put back in. I think I am moving down the right path know. I was able try to home the axis's but there is no movement in the drives or so it seams. No drive faults. Attached is report after the changes I made according to my notes from 2020.

[cnckeith]

you don't need to define an input with any canned functionality to use it, there is a good zri example in the macro programming guide, use that

[cnckeith]

need photos

[DLAM]

Here is some pictures of the machine and the control

[DLAM]

More pictures of the control

[DLAM]

Last of the controls

[DLAM]

Here is a layout of my cabinet.

Cabinet.pdf

(74.12 KiB) Downloaded 3 times

[ShawnM]

Please start a Google photo album and put all your photos in there and then share a link her. This way ALL your photos are in one place and easy to find and navigate them when they are ALL in one place.

See this topic on how:
viewtopic.php?f=60&t=1043&p=5010&hilit= ... lbum#p5010