Parameter 16 is the max. probing distance. Set this to 300 (mm) on a metric system
Uwe
ProbeApp V3: The Ultimate Probe Software for CNC12
Moderator: cnckeith
-
OG1
- Posts: 22
- Joined: Mon Dec 11, 2023 2:18 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 544538046067-0616237327
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: ProbeApp V3: The Ultimate Probe Software for CNC12
I've only just begun using it. Loving it so far.
-
H.C
- Posts: 9
- Joined: Sat Aug 19, 2023 12:07 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0008DC111213-0116230085
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: ProbeApp V3: The Ultimate Probe Software for CNC12
oh, thx UweParameter 16 is the max. probing distance. Set this to 300 (mm) on a metric system
Uwe
edit: solved: 16 was set to 254
-
cryptonym
- Posts: 26
- Joined: Sun Feb 20, 2022 2:22 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: ProbeApp V3: The Ultimate Probe Software for CNC12
I'm getting ready to install 5.10 of CNC12 and notice where it has a warning about all third party apps must be 64 bit. Does this impact using ProbeApp? Thanks.
-
suntravel
- Posts: 2295
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: ProbeApp V3: The Ultimate Probe Software for CNC12
ProbeApp will work with 5.10
Uwe
Uwe