Acorn won't run g code/mdi < lathe G98/G99?>
Moderator: cnckeith
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
Re: Acorn won't run g code/mdi < lathe G98/G99?>
Have you tried G98, as Keith suggested?
For example:
... or, if you are going to use G1 in the default G99 mode, do you have the spindle running already, and have you given it a suitable per-revolution feedrate?
For example:
For example:
Code: Select all
G1 G98 F5 X1 Z1
For example:
Code: Select all
M3 S1200
G1 G99 F0.01 X1 Z-2
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
Re: Acorn won't run g code/mdi < lathe G98/G99?>
I'll try that. My buddy has a bunch of old code from an AHA that he really just wants to transfer over and have work..cncsnw wrote: ↑Sat May 04, 2024 11:18 pm Have you tried G98, as Keith suggested?
For example:... or, if you are going to use G1 in the default G99 mode, do you have the spindle running already, and have you given it a suitable per-revolution feedrate?Code: Select all
G1 G98 F5 X1 Z1
For example:Code: Select all
M3 S1200 G1 G99 F0.01 X1 Z-2
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
Re: Acorn won't run g code/mdi < lathe G98/G99?>
Here is an example of the code he wants to run
-
- Posts: 2294
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Acorn won't run g code/mdi < lathe G98/G99?>
I suggest to install current 5.1 software with the updates for a better Network connection on some hardware.
Uwe
Uwe
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
-
- Posts: 2294
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Acorn won't run g code/mdi < lathe G98/G99?>
Your reports are 5.08...
.... are the com errors gone now ?
Uwe
.... are the com errors gone now ?
Uwe
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA
Re: Acorn won't run g code/mdi < lathe G98/G99?>
His Ahha programs will not run without some changes.
G90 is not appropriate there. All X and Z coordinates are absolute by default.
"F8" looks like an inches-per-minute feedrate. To use that, you need a G98 code.
G90 is not appropriate there. All X and Z coordinates are absolute by default.
"F8" looks like an inches-per-minute feedrate. To use that, you need a G98 code.
-
- Posts: 113
- Joined: Wed Feb 12, 2020 3:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: USA