Does anyone happen to know how I would go about wiring this solenoid to centroid for air blast? I just simply want to hook it up to the relay board but am unsure how I can go about doing it.
Here's the solenoid:
https://amzn.to/48dwsFX
Any help is appreciated!
Wiring a solenoid for air blast?
Moderator: cnckeith
-
Centroid_Tech2
- Posts: 104
- Joined: Mon Mar 03, 2014 4:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Wiring a solenoid for air blast?
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
gregfox
- Posts: 34
- Joined: Sun Oct 15, 2023 7:02 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Wiring a solenoid for air blast?
You're my hero man thank you!
-
gregfox
- Posts: 34
- Joined: Sun Oct 15, 2023 7:02 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Wiring a solenoid for air blast?
Do I need the fly back diode? If I do what would be a proper diode to use? I don't know much about electrical applications, I apologize for so many questions.
-
suntravel
- Posts: 2302
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Wiring a solenoid for air blast?
You need a Zener 24V Diode, 5W should be ok, more will also work ok
Uwe
Uwe
-
gregfox
- Posts: 34
- Joined: Sun Oct 15, 2023 7:02 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Wiring a solenoid for air blast?
Would a 1N4007 diode work by chance? I only ask because I have one on hand. If not I will be ordering that one. Thanks for the help.
-
kb58
- Posts: 180
- Joined: Tue Jul 11, 2023 12:25 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: San Diego CA
Re: Wiring a solenoid for air blast?
Yes, any regular diode in the 1N400X series is perfect, a zener is not required.
Previous hobby, building hard core sports cars. See http://midlana.com/ and http://kimini.com/
-
gregfox
- Posts: 34
- Joined: Sun Oct 15, 2023 7:02 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Wiring a solenoid for air blast?
Awesome thanks for the help guys, got it workin!
-
gregfox
- Posts: 34
- Joined: Sun Oct 15, 2023 7:02 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Wiring a solenoid for air blast?
I take that back lol, what could I have done wrong? Ran for about 30 and started to see smoke, lol.
- Attachments
-
-
Re: Wiring a solenoid for air blast?
What did you use for your DC power supply, through the PLC output to the solenoid coil?
What voltage did/do you measure coming from that supply?
What voltage did/do you measure coming from that supply?