New build Sherline Lathe and Mill

[cnckeith]

report shows them still set to -5

create a photo album. like this.


post link to album here on your build thread.

you can post photos and videos to a google photo album

examples... Marty, Kai and I have been using google photo albums for this.. here is an example. https://photos.app.goo.gl/foisQ42QZEbmA4Nv1

We can not stress enough the importance of PHOTOS. PHOTOS and Videos are key to us being able to see what you see. Post a description and photos of the machine tool and all its cnc controlled accessories. Picture is worth a thousand words and clears up misunderstanding instantly. The best way is to use a free online photo album service like Google Photos. Upload large high resolution images to the Google Photos, create an Album, put all your photos in one album and click "share" and then "get link" and copy the link it generates and post in your thread, then any one with the link can view the photos.

You can post photos directly to the forum using the Attachment tab. but we would prefer you us a online photo album and post the link to it so all your images will be in one spot, not spread over a bunch of posts..having all the photos in one location makes it easier for all to understand your project and give you good advice.


- Include Screen Shots.

Press CTRL P in the Wizard, it will create a PDF of all the Wizard screen settings.
or
Make them with the built-in free Windows Snipping Tool to show us exactly what you are seeing. Here is a video showing how to do this.

[Helinut]

Today I change the X softlimit to -2.5 and it stopped at -5,0 as it should.

[Helinut]

Snipe and Photo alblum in use.
https://photos.app.goo.gl/dvjGLoSKxGwb5XTB8

[cnckeith]

Snipe and Photo alblum in use.
https://photos.app.goo.gl/dvjGLoSKxGwb5XTB8

nice! thanks.
if someone joins the album they will get a notification when you add a photo to it.
now add some photos of the machine etc.