Hi Guys,
I have home switches on all axis except the A, so had this set not not to home in the .hom file. But like a plonker after I updated some settings in the wizard it must also have over written the .hom file so when I came to rehome the machine it started looking for a home switch on A (but there isn't one).
So now the A axis on the DRO is at 0.001 and I can't get rid of it and can't run the machine as it won't let me set the WCS until the A axis is at zero, which I can't manually set to zero as my encoder isn't able to increment at 0.001.
I'm sure there's a really simple way to sort this (I'm used to mach3 so acorn is all new to me).
Help .
Cheer
Andy
A Axis - how do I set machine home manually for this
Moderator: cnckeith
-
- Posts: 27
- Joined: Fri Feb 10, 2023 7:13 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: A Axis - how do I set machine home manually for this
Ignore me, sorted, I set the movement for the A axis in the wizard to 0.001.