Hi Team,
Would Centroid have have the wiring diagrams avaliable for the attached serial cabinet? Im not sure if this was a board built by centroid or the team that did the fit out 20 years ago.
Either way, the diagrams have been misplaced, and having a set would bd helpful.
Will be re fitting with an acorn board.
Thsnks, Luke.
Wiring Diagram for Old Centroid Cabinet.
Moderator: cnckeith
-
- Posts: 12
- Joined: Wed Nov 20, 2013 9:08 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
-
- Posts: 97
- Joined: Mon Mar 03, 2014 4:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Wiring Diagram for Old Centroid Cabinet.
The paper work from back then lists K9600001, but the cabinet looks more like K9600016
- Attachments
-
- K9600001.pdf
- (400.48 KiB) Downloaded 11 times
-
- K9600016.pdf
- (435.47 KiB) Downloaded 14 times
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 12
- Joined: Wed Nov 20, 2013 9:08 pm
- Allin1DC CNC Controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Wiring Diagram for Old Centroid Cabinet.
Thanks alot. Exactly what i was after.