Ether1616 Outputs not working <self resolved video>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
mrp192
Posts: 95
Joined: Sat Oct 10, 2020 4:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3699, 3788
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Ether1616 Outputs not working <self resolved video>

Post by mrp192 »

Hey everyone,
This is something I have been trying to figure out for awhile now and I am too the point where I need to ask for help. I have my spindle cooling fan on one of the Ether1616 outputs and when I either run a job or force the output nothing happens. It is as if my ether1616 did not get the command. I know the Ether1616 is working because the inputs are working.

Attachments
report_E415F6F96E67-1005203788_2021-11-06_19-05-47.zip
(703.25 KiB) Downloaded 65 times


RogDC
Posts: 219
Joined: Wed Jan 01, 2020 2:40 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Ether1616 Outputs not working

Post by RogDC »

Is that the correct relay board for the Ether1616?
Can you attempt to force any of the other outputs from the Ether1616 into the correct state?


mrp192
Posts: 95
Joined: Sat Oct 10, 2020 4:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3699, 3788
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Ether1616 Outputs not working

Post by mrp192 »

RogDC wrote: Sat Nov 06, 2021 10:44 pm Is that the correct relay board for the Ether1616?
Can you attempt to force any of the other outputs from the Ether1616 into the correct state?
That is the relay board that came with the Ether1616. No I cannot force any other outputs for the Ether1616.


TheKitMill
Posts: 153
Joined: Wed Sep 06, 2017 1:52 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Ether1616 Outputs not working

Post by TheKitMill »

Hi It looks like you have the Relay Board hooked directly to the Acorn Board and you are connected to output 8. Try forcing output 8 and see if it turns on the relay you are connected to.


tblough
Posts: 3323
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Ether1616 Outputs not working

Post by tblough »

Remember outputs on the Ether1616 start at 33:

Output 1 on Ether1616 with A0 address = CNC12 output 33
Output 2 on Ether1616 with A0 address = CNC12 output 34
Output 3 on Ether1616 with A0 address = CNC12 output 35
etc..
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.


mrp192
Posts: 95
Joined: Sat Oct 10, 2020 4:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3699, 3788
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Ether1616 Outputs not working

Post by mrp192 »

TheKitMill wrote: Sun Nov 07, 2021 10:22 am Hi It looks like you have the Relay Board hooked directly to the Acorn Board and you are connected to output 8. Try forcing output 8 and see if it turns on the relay you are connected to.
I have my E1616 mounted under my Acorn. I have DC circuits on the left and AC on the right.


mrp192
Posts: 95
Joined: Sat Oct 10, 2020 4:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3699, 3788
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Ether1616 Outputs not working

Post by mrp192 »

tblough wrote: Sun Nov 07, 2021 10:57 am Remember outputs on the Ether1616 start at 33:

Output 1 on Ether1616 with A0 address = CNC12 output 33
Output 2 on Ether1616 with A0 address = CNC12 output 34
Output 3 on Ether1616 with A0 address = CNC12 output 35
etc..
Ill try that but but even if I run code it still doesn't turn on.


mrp192
Posts: 95
Joined: Sat Oct 10, 2020 4:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3699, 3788
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Ether1616 Outputs not working

Post by mrp192 »

I'm an idiot and I figured it out.



Upnorth
Posts: 238
Joined: Wed Apr 01, 2020 8:23 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1702
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Ether1616 Outputs not working

Post by Upnorth »

Good you made a video with the solution. Nice to have someone go the extra mile on that. It might help someone in the future.


Post Reply