When I start cnc12 it loads in full screen with no virtual jog panel.
Even when I try to open it from the toolbar it doesn't pull up into position on the right hand side of page. When I hover over the VCP on toolbar its blank, and Grey. Thanks in advance
Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
Moderator: cnckeith
-
- Posts: 68
- Joined: Wed Apr 07, 2021 11:16 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: will obtain
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
Last edited by CivilCNC on Wed Oct 27, 2021 3:44 pm, edited 1 time in total.
-
- Posts: 237
- Joined: Wed Apr 01, 2020 8:23 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 1702
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Help! No Virtual Jog Panel when starting cnc12
ALT J should turn on the virtual jog panel.
-
- Posts: 31
- Joined: Sun Mar 02, 2014 7:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 20915A (1124081904)
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: SO. TRENTON
Re: Help! No Virtual Jog Panel when starting cnc12
HI THERE..
Check the link....
Win.10 tablet mode...
VCP-options...
Restart computer...
Check the link....
Win.10 tablet mode...
VCP-options...
Restart computer...
-
- Posts: 31
- Joined: Sun Mar 02, 2014 7:18 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 20915A (1124081904)
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: SO. TRENTON
Re: Help! No Virtual Jog Panel when starting cnc12
OK..try this...
DO a search NO KEY PAD.....
DO a search NO KEY PAD.....
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Help! No Virtual Jog Panel when starting cnc12
Windows is most likely in tablet mode which causes this.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 68
- Joined: Wed Apr 07, 2021 11:16 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: will obtain
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Help! No Virtual Jog Panel when starting cnc12
This is what it looks like when I hit alt-J, there is no VCP options to select from this window- also it doesn't appear to be functional at all.
It comes up but way different
Last edited by CivilCNC on Wed Oct 27, 2021 3:37 pm, edited 1 time in total.
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Help! No Virtual Jog Panel when starting cnc12
post a fresh report.zip
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html