Acorn CNC12 Mill, Router, and Lathe v4.64 has been released! < v4.80 has superseded v4.64>
Moderator: cnckeith
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Acorn CNC12 Mill, Router, and Lathe v4.62 has been released!
juda,
hello. please post a fresh report.zip and create a new post in the main Acorn support forum and we will help. thanks keith
hello. please post a fresh report.zip and create a new post in the main Acorn support forum and we will help. thanks keith
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7
- Joined: Sun Jan 05, 2020 1:31 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: ok 375
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn CNC12 Mill, Router, and Lathe v4.62 has been released!
Ok keith
As soon as I do I send them to you
Thank you.
As soon as I do I send them to you
Thank you.
-
- Posts: 34
- Joined: Thu Mar 05, 2020 1:15 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: A81087B4FFCB-0712192265
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Farmington Hills, MI
Re: Acorn CNC12 Mill, Router, and Lathe v4.64 has been released!
What is new/modified in v4.64 vs v4.62?
-
- Posts: 793
- Joined: Thu Apr 12, 2018 11:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn CNC12 Mill, Router, and Lathe v4.64 has been released!
From the download page:
V4.64 release notes.
- Fixed issue when Parameter 43 is set to non-zero it forces the user to use a Tool Touch Off when performing a Auto Part Z0 probing cycle.
- Added more clarity in the Wizard Tool Touch page of how the TT height value effects Auto Part 0 probing cycle.
-
- Posts: 34
- Joined: Thu Mar 05, 2020 1:15 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: A81087B4FFCB-0712192265
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Farmington Hills, MI
Re: Acorn CNC12 Mill, Router, and Lathe v4.64 has been released!
Thank you! Somehow, I've missed those release notes!
-
- Posts: 4
- Joined: Wed Oct 16, 2019 4:42 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: C1299
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn CNC12 Mill, Router, and Lathe v4.6 has been released!
Hi Keith,
I am having issues with the homing and squaring after upgrading from 4.6 to 4.64 Router. I have re done the wizard like you are suggesting and the auto homing for Y is strange, it moves only one of the axis instead of both in sync before tripping the switch even though I have setup the pairing correctly! I have looked at all possibilities and can’t get it to home. Any advice? Thanks
I am having issues with the homing and squaring after upgrading from 4.6 to 4.64 Router. I have re done the wizard like you are suggesting and the auto homing for Y is strange, it moves only one of the axis instead of both in sync before tripping the switch even though I have setup the pairing correctly! I have looked at all possibilities and can’t get it to home. Any advice? Thanks
cnckeith wrote: ↑Tue Feb 02, 2021 10:26 pm a report from v4.5 will work, mill to mill. lathe to lathe.
do not use a mill v4.5 report and try to use it with the new CNC12 Router version!!
this first Router version has to be setup using the wizard. then subsequent releases can use a Router report to update to the new version.
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Acorn CNC12 Mill, Router, and Lathe v4.6 has been released!
post a fresh report.zip please.Clarin wrote: ↑Thu Jun 03, 2021 4:03 pm Hi Keith,
I am having issues with the homing and squaring after upgrading from 4.6 to 4.64 Router. I have re done the wizard like you are suggesting and the auto homing for Y is strange, it moves only one of the axis instead of both in sync before tripping the switch even though I have setup the pairing correctly! I have looked at all possibilities and can’t get it to home. Any advice? Thanks
cnckeith wrote: ↑Tue Feb 02, 2021 10:26 pm a report from v4.5 will work, mill to mill. lathe to lathe.
do not use a mill v4.5 report and try to use it with the new CNC12 Router version!!
this first Router version has to be setup using the wizard. then subsequent releases can use a Router report to update to the new version.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 30
- Joined: Wed Sep 30, 2020 11:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn CNC12 Mill, Router, and Lathe v4.64 has been released!
Hi,
I tried searching, but seems nobody ask....so here's my question, will windows 11 work with latest Acorn CNC12 Mill like windows 10?
TIA
I tried searching, but seems nobody ask....so here's my question, will windows 11 work with latest Acorn CNC12 Mill like windows 10?
TIA
Last edited by zz0122 on Sat Nov 20, 2021 12:31 pm, edited 1 time in total.
-
- Posts: 9
- Joined: Mon Apr 22, 2019 2:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C5B8C-0111191542
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bolton, MA
- Contact:
Re: Acorn CNC12 Mill, Router, and Lathe v4.64 has been released!
I must be making a silly rookie mistake while doing the 4.5 -> 4.6 Lathe update.
Following https://www.centroidcnc.com/centroid_di ... ctions.pdf. Page 2, top of page 3. My attempts to restore the saved report always require a power down and the result is always the same -- no restored report. Further, when I start the wizard there is a never a 'update wizard' screen/option.
I took photos of each configuration screen so I could go through an manually re-enter everything, but that shouldn't be required.
Help?
Following https://www.centroidcnc.com/centroid_di ... ctions.pdf. Page 2, top of page 3. My attempts to restore the saved report always require a power down and the result is always the same -- no restored report. Further, when I start the wizard there is a never a 'update wizard' screen/option.
I took photos of each configuration screen so I could go through an manually re-enter everything, but that shouldn't be required.
Help?
-
- Posts: 2333
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: Acorn CNC12 Mill, Router, and Lathe v4.64 has been released!
That's exactly what's required. If you keep reading through the manual on page 4 it states in highlighted text that you CANNOT use the "restore report" method when upgrading to the first version starting with 4.64. You must manually enter all your parameters. Going forward you can restore reports.mike.davison wrote: ↑Thu Nov 18, 2021 10:41 pm I must be making a silly rookie mistake while doing the 4.5 -> 4.6 Lathe update.
Following https://www.centroidcnc.com/centroid_di ... ctions.pdf. Page 2, top of page 3. My attempts to restore the saved report always require a power down and the result is always the same -- no restored report. Further, when I start the wizard there is a never a 'update wizard' screen/option.
I took photos of each configuration screen so I could go through an manually re-enter everything, but that shouldn't be required.
Help?