Acorn lathe? (Acorn CNC12 Lathe has been released! 10-20-17)

Post by **martyscncgarage** » Fri Oct 13, 2017 12:03 pm

DICKEYBIRD wrote: ↑Fri Oct 13, 2017 9:36 am Well poop! I'm not quite there yet. I'm mounting the encoder this weekend. Got the 1:1 spindle timing pulleys modified & mounted last night and the belt came in. Will hook up the motors & be ready for software early next week. Hoo-rah!

You can use MILL for testing....but PM Keith, he'll probably work with you, provided you provide timely feedback and post pictures, video clip and configuration of your machine.

DICKEYBIRD · Post by **DICKEYBIRD** » Fri Oct 13, 2017 1:44 pm

martyscncgarage wrote: ↑Fri Oct 13, 2017 12:03 pm...but PM Keith, he'll probably work with you..

I'll make sure & tell him good ol' Marty sent me when I get ready for lathe software 2:30 AM Sunday!

frijoli · Post by **frijoli** » Tue Oct 17, 2017 10:40 pm

Any update on the lathe release?

Post by **cnckeith** » Tue Oct 17, 2017 10:55 pm

Shooting for this Friday.
We are still working on Mill tweaks and additions. v4.08 is in the final testing phase. The Beta team test results over the weekend we're good. If you need lathe software please private message me and I can set you up with a pre-release copy.

frijoli · Post by **frijoli** » Wed Oct 18, 2017 8:41 am

Thanks Keith. I am good for now.
I am ordering all the components and want everything on hand so I can start building.

DICKEYBIRD · Post by **DICKEYBIRD** » Wed Oct 18, 2017 9:32 am

Do we still need to do the TV session & be ready for 2 way communication to install the lathe software? I think I'll be ready for it this weekend but can't be home during your regular weekday hours.

Post by **cnckeith** » Wed Oct 18, 2017 10:32 am

yes. I'm available evenings and weekends. send me pm with time when you will be ready.

DICKEYBIRD · Post by **DICKEYBIRD** » Wed Oct 18, 2017 10:45 am

cnckeith wrote: ↑Wed Oct 18, 2017 10:32 am yes. I'm available evenings and weekends. send me pm with time when you will be ready.

Wow, that there is true dedication Keith, thanks! I may just take you up on that but only when/if I get some motion going.

Post by **cnckeith** » Fri Oct 20, 2017 5:48 pm

Acorn Lathe version 4.08 has been released! along with Mill 4.08 as well and is available for download here....
http://www.centroidcnc.com/centroid_diy ... oads.html

If you are installing for the very first time follow these videos...
http://www.centroidcnc.com/centroid_diy ... guide.html

If you are updating and existing CNC12 installation follow this video...
https://youtu.be/Nnupz_KNpnY

DICKEYBIRD · Post by **DICKEYBIRD** » Fri Oct 20, 2017 6:01 pm

Woo-Hoo & double Hoo-Rah!! Let's hear it for Keith & Centroid. They finally opened Pandora's Box!

Centroid Community CNC Support Forum

Acorn lathe? (Acorn CNC12 Lathe has been released! 10-20-17)

Re: Acorn lathe? (Acorn Lathe has been Released 10-20-17)

Re: Acorn lathe? (Release Candidate is available for early adopters)

Re: Acorn lathe? (Release Candidate is available for early adopters)

Re: Acorn lathe? (Release Candidate is available for early adopters)

Re: Acorn lathe? (Release Candidate is available for early adopters)

Re: Acorn lathe? (Release Candidate is available for early adopters)

Re: Acorn lathe? (Release Candidate is available for early adopters)

Re: Acorn lathe? (Release Candidate is available for early adopters)

Re: Acorn lathe? (Acorn Lathe has been released!)

Re: Acorn lathe? (Acorn CNC12 Lathe has been released! 10-20-17)