Question Re: V4.6 (Resolved)

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Jrlee
Posts: 35
Joined: Wed Jan 09, 2019 1:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: F045DA798AE4-1119181352
Contact:
Contact Jrlee

Question Re: V4.6 (Resolved)

Post by Jrlee »

I just upgraded from V4.5 to V4.62 but am unclear regarding the auto square set up. I read all of the upgrade notes but it still left me "puzzled". I did not have the option when setting up the inputs in the I?O setup for selecting the slaved motor input sensor to input 2. When viewing the AXIS PAIRING setup screen and notes regarding SLAVED AXIS HOME SWITCH PLC INPUT I was wondering if it was setup automatically so need some clarification.
Thank you for your support
Jr
Attachments
report_F045DA798AE4-1119181352_2021-02-23_11-23-42.zip
(602.94 KiB) Downloaded 1 time
Top
cnckeith
Posts: 3113
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:
Contact cnckeith

Re: Question Re: V4.6

Post by cnckeith »

slaved home.PNG
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Top
cnckeith
Posts: 3113
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:
Contact cnckeith

Re: Question Re: V4.6

Post by cnckeith »

https://photos.app.goo.gl/nv1JY6YruWAWu3HfA
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Top
cnckeith
Posts: 3113
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:
Contact cnckeith

Re: Question Re: V4.6

Post by cnckeith »

pair.PNG
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Top
Jrlee
Posts: 35
Joined: Wed Jan 09, 2019 1:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: F045DA798AE4-1119181352
Contact:
Contact Jrlee

Re: Question Re: V4.6

Post by Jrlee »

Thank you Keith. After seeing your first post I realized I didn't change the INPUT TYPE from the 'ROUTER' selection to the HOME selection to find the SLAVE HOME INPUT. After looking further into this I found that I should not have moved the settings from the VCP AUX KEY MACRO ASSIGNMENTS from the previous version to V4.62.
Thnaks for the hellp. I should have another cup of coffee to keep me more alert when doing the upgrade
Jr
Top
martyscncgarage
Posts: 7493
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Question Re: V4.6

Post by martyscncgarage »

Jrlee wrote: ↑Tue Feb 23, 2021 3:04 pm Thank you Keith. After seeing your first post I realized I didn't change the INPUT TYPE from the 'ROUTER' selection to the HOME selection to find the SLAVE HOME INPUT. After looking further into this I found that I should not have moved the settings from the VCP AUX KEY MACRO ASSIGNMENTS from the previous version to V4.62.
Thnaks for the hellp. I should have another cup of coffee to keep me more alert when doing the upgrade
Jr
Please report back if all is resolved.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Top
Jrlee
Posts: 35
Joined: Wed Jan 09, 2019 1:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: F045DA798AE4-1119181352
Contact:
Contact Jrlee

Re: Question Re: V4.6

Post by Jrlee »

Marty all is resolved.
Jr
Top
martyscncgarage
Posts: 7493
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Question Re: V4.6

Post by martyscncgarage »

Jrlee wrote: ↑Tue Feb 23, 2021 8:31 pm Marty all is resolved.
Jr
Great!
Thanks Jr
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Top
Post Reply

Return to “Centroid Acorn CNC Controller”