I have a question regarding spindle brake timing.
My spindle is using pneumatic spindle brake release. The brake release is activating a few hundred milliseconds before starting the spindle.
This is good, but my brake need a little more time between release and spindle start. is there any parameter to control this time delay?
Brake activates the same time as the spindle stops. Is there any way to delay the brake activation?
Thanks, and stay safe.
Brake timing question.
Moderator: cnckeith
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Brake timing question.
goto this page.
viewtopic.php?f=60&t=3397
download this doc
https://www.centroidcnc.com/centroid_di ... ctions.pdf
and read the line covering the spindle brake and how to adjust the timing on page 5
viewtopic.php?f=60&t=3397
download this doc
https://www.centroidcnc.com/centroid_di ... ctions.pdf
and read the line covering the spindle brake and how to adjust the timing on page 5
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 28
- Joined: Tue Nov 20, 2018 12:27 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Brake timing question.
Thanks Keith,
Changed to 500ms and problem fixed.
Stay safe.
Changed to 500ms and problem fixed.
Stay safe.