CNC12 Lathe Error 913 Can't open gcode file <resolved>
Moderator: cnckeith
-
- Posts: 11
- Joined: Mon Mar 30, 2020 1:37 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
CNC12 Lathe Error 913 Can't open gcode file <resolved>
Hello everyone.
New member to the forum, not a new Centroid user though. I have one milling machine that has been running the Centroid acorn controller for over a year and it has been a great experience so far. I recently converted a small Lighmachines cnc lathe to the Acorn controller. Everything moves and works as it should but when I try to load a program it always tells me Error 913 Can't open file. I am using HSMWorks for my cam software and the post processor I am using is a modified Fanuc one that I got from this forum that a member had posted a while back.
I have attached the program in this post. I would really appreciate any help out there.
New member to the forum, not a new Centroid user though. I have one milling machine that has been running the Centroid acorn controller for over a year and it has been a great experience so far. I recently converted a small Lighmachines cnc lathe to the Acorn controller. Everything moves and works as it should but when I try to load a program it always tells me Error 913 Can't open file. I am using HSMWorks for my cam software and the post processor I am using is a modified Fanuc one that I got from this forum that a member had posted a while back.
I have attached the program in this post. I would really appreciate any help out there.
- Attachments
-
- 0002.nc
- (5.67 KiB) Downloaded 141 times
Re: CNC12 Lathe Error 913 Can't open gcode file
What was the full text of the 913 error message? Did it include the name of the file it was trying to open, but could not?
If you were to post a Report, then we could see what the full path name of the currently-loaded job is; and we could see whether that file exists in the expected location; and we could see what value you have in Parameter 4, to determine how files loaded from external sources are handled.
Without the report, all I can tell you is that the attached .nc file does not contain any subprogram or macro calls, so your problem is probably not related to calling subprograms and macros.
If you were to post a Report, then we could see what the full path name of the currently-loaded job is; and we could see whether that file exists in the expected location; and we could see what value you have in Parameter 4, to determine how files loaded from external sources are handled.
Without the report, all I can tell you is that the attached .nc file does not contain any subprogram or macro calls, so your problem is probably not related to calling subprograms and macros.
-
- Posts: 64
- Joined: Wed Sep 18, 2019 4:46 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: A81087B53034-0710192235
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 Lathe Error 913 Can't open gcode file
If you save/move the .nc file to the Centroid nc folder and open it from there it will open. Opening it from a USB or other location brings up this error.
-
- Posts: 11
- Joined: Mon Mar 30, 2020 1:37 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 Lathe Error 913 Can't open gcode file
You are exactly right! Thank you!
I have no idea why that is. On my mill, I always open the NC files directly from my USB drive and I have never seen this error. Now I have to always copy my files from my usb drive to that folder. Quite annoying. At least it works now though. Thank you again.
I have no idea why that is. On my mill, I always open the NC files directly from my USB drive and I have never seen this error. Now I have to always copy my files from my usb drive to that folder. Quite annoying. At least it works now though. Thank you again.
-
- Posts: 55
- Joined: Thu Jan 25, 2018 1:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: AllinOne cncm system ID: 0625181998 / XE3HFDFJBI
Acorn/Leadshine 4axis bench mill: 3403DE6C0783-01919192476
Acorn/Gecko G540 Sherline Lathe: 0479B7B00885-1107192659 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 Lathe Error 913 Can't open gcode file
Yep, going through that same issue myself. Why will my mill load and run from the flash drive? But, my lathe won't? Is there a fix for this?
Deon Daugherty
GOD, Country, Family
GOD, Country, Family
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: CNC12 Lathe Error 913 Can't open gcode file
Post a report please.....
(ALWAYS post a report when asking for assistance)
This should not be the case. With CNC12 and Windows 10, you should be able to load a file from a USB drive.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 55
- Joined: Thu Jan 25, 2018 1:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: AllinOne cncm system ID: 0625181998 / XE3HFDFJBI
Acorn/Leadshine 4axis bench mill: 3403DE6C0783-01919192476
Acorn/Gecko G540 Sherline Lathe: 0479B7B00885-1107192659 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 Lathe Error 913 Can't open gcode file
Here is a report and a file. Was working on finding a Post Processor that works with Solidworks using sample files. But, as long as I Copy paste to the NC folder the file could be opened. just not from the thumb drive.
- Attachments
-
- Sample1Lathe.txt
- file example
- (2.38 KiB) Downloaded 103 times
-
- report_0479B7B00885-1107192659_2020-04-24_05-38-54.zip
- Sherline Lathe
- (279.56 KiB) Downloaded 145 times
Deon Daugherty
GOD, Country, Family
GOD, Country, Family
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 Lathe Error 913 Can't open gcode file
this is a cnc12 lathe bug with a simple work around. with v4.20.1 lathe please copy the g code program from the USB drive to c:\cnct\ncfiles with windows 10 and then use cnc12 to F1 Load the program and then you are good to go and press cycle start to run it. in the next public beta release, (hopefully today) you will be able to load directly from the USB drive within cnc12 lathe without getting the 913 error.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 55
- Joined: Thu Jan 25, 2018 1:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: AllinOne cncm system ID: 0625181998 / XE3HFDFJBI
Acorn/Leadshine 4axis bench mill: 3403DE6C0783-01919192476
Acorn/Gecko G540 Sherline Lathe: 0479B7B00885-1107192659 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CNC12 Lathe Error 913 Can't open gcode file
Yep that is what I do. It's all good. Thank You for the reply.
Deon Daugherty
GOD, Country, Family
GOD, Country, Family
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 Lathe Error 913 Can't open gcode file
this bug has been squashed in the latest beta, give it a try!
viewtopic.php?f=60&t=4231&p=34268#p34268
viewtopic.php?f=60&t=4231&p=34268#p34268
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html