Need Post Processor Help

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Tlempicke
Posts: 169
Joined: Wed Jul 04, 2018 1:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

Re: Need Post Processor Help

Post by Tlempicke »

I set everything at 2000 steps and started out with 2 turns per inch. After a bit with the dial indicator I got it within .001 repeatable on all three axis.
Ran several toolpaths that were on the computer and they each ran like a dream.

Thanks a lot guys!
Top
Post Reply

Return to “Centroid Acorn CNC Controller”