A BIG THANKS
Posted: Thu Nov 30, 2023 10:25 am
I just want to say Thank you for all your help! Having absolutely zero metal working or CAD/CAM experience, I took and online Fusion course (Learn Fusion in 30 Days), and the Titans Of CNC Building Block course with hopes to lean to draw and mill stuff! Simultaneously, I worked on converting a PM833 to CNC with the Centroid Acorn/CNC12 and lots of help from this forum!
After finishing these courses, I sketched and CAMed this tiny model steam engine. As a challenge, every part short of the piston and small knurled knob was made on my mill. I finished it recently and cannot say thank you enough for all of your patience and help. The assistance I have received is nothing short of amazing. I look forward to being able to offer the same in the future.
After finishing these courses, I sketched and CAMed this tiny model steam engine. As a challenge, every part short of the piston and small knurled knob was made on my mill. I finished it recently and cannot say thank you enough for all of your patience and help. The assistance I have received is nothing short of amazing. I look forward to being able to offer the same in the future.