Centroid does small!
Posted: Sun Jun 18, 2023 8:33 pm
I was pretty pleased the way these parts came out this weekend on a Centroid equipped Hardinge HLV-H and a Bridgeport clone.
The channels in this mixer are 0.015" wide and that's a 0.008" radius where it enters the center chamber with a 0.020" center hole. These other parts are 0.224" in diameter with a 0.0067" orifice.
The channels in this mixer are 0.015" wide and that's a 0.008" radius where it enters the center chamber with a 0.020" center hole. These other parts are 0.224" in diameter with a 0.0067" orifice.