Bridgeport Interact 412

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
Clausing2020
Posts: 86
Joined: Thu Sep 17, 2020 5:31 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3639
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Bridgeport Interact 412

Post by Clausing2020 »

Just want to put this pic out there
Attachments
IMG_4574.jpg
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Bridgeport Interact 412

Post by martyscncgarage »

Outstanding. Acorn running a VMC. Can you summarize the build, drives/motors, VFD/Spindle Motor
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Clausing2020
Posts: 86
Joined: Thu Sep 17, 2020 5:31 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3639
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Bridgeport Interact 412

Post by Clausing2020 »

Ok here is the info on the build. The spindle motor is the original 5.5 KW Fanuc. The spindle is ran with 220 single phase with a Delta C2000 VFD with a PG01L Encoder Feedback Card for the spindle orientation. The Servos and Drives are Bergerda Automation Technology. The Z axis is a 1.5 KW and the X And Y are 1.0 KW 220 volt AC. This is set up with Acorn and a ether 1616 I/O expansion kit.
Chipwelder
Posts: 25
Joined: Sun Apr 28, 2019 12:16 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 102139, 20D7787D9392-0817226460
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No

Re: Bridgeport Interact 412

Post by Chipwelder »

Are you using the preprogrammed spindle on(green) off(red) buttons on the default VCP.
And are you using them to turn one OUTPUT on and off that controls a contractor or similar?
I know this is pretty basic but no o seems to be able to set back to this level of simplicity and show me how to do it.
Thanks in advance
Clausing2020
Posts: 86
Joined: Thu Sep 17, 2020 5:31 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3639
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Bridgeport Interact 412

Post by Clausing2020 »

Yes I am using the on off buttons for manual spindle control. The way I have it set up it is coming from the 0-10 volt terminals on the acorn board to the 0-10 volt terminals on the VFD.
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: Bridgeport Interact 412

Post by cncsnw »

The only essential changes from the factory PLC program were:
1) Provide a spindle-run signal to accompany the spindle-orient signal (required by the Delta C2000 drive)
2) Manage carousel advance/retract with a single-coil spring-return solenoid, instead of the usual two-coil detented solenoid
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Bridgeport Interact 412

Post by cnckeith »

Clausing2020 wrote: Sat Feb 04, 2023 12:13 am Just want to put this pic out there
can i use this pic on the Acorn web page?
and do you have any others?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Clausing2020
Posts: 86
Joined: Thu Sep 17, 2020 5:31 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3639
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Bridgeport Interact 412

Post by Clausing2020 »

Hi Keith here are some more Pics of the Machine. Yes you may use them on the web page. I do not know why all these came out side ways. Can you rotate?

Thanks John
Attachments
IMG_4590.jpg
IMG_4589.jpg
IMG_4588.jpg
IMG_4587.jpg
IMG_4586.jpg
IMG_4585.jpg
IMG_4584.jpg
IMG_4581.jpg
Clausing2020
Posts: 86
Joined: Thu Sep 17, 2020 5:31 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3639
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Bridgeport Interact 412

Post by Clausing2020 »

Hi Keith here are some more pics. Yes you can use them on the web page.

Thanks John
Attachments
1B6BCB13-F0D9-4567-BCED-70EE641058EE.jpeg
186EE559-4FB3-4C40-9C27-1E1DC75D8D52.jpeg
7A7F2746-B8F0-47F8-A7C2-FC934D73FE3B.jpeg
CC0DBDB0-43DF-4734-A51F-63A3DB949012.jpeg
F37DFC7E-DC16-4691-9D9A-5F8DCA8AE356.jpeg
446B908A-00A5-4D97-A0F8-39954DFAF303.jpeg
277A3856-CBAE-476F-9B16-FA17CEBD90F0.jpeg
E23F8F59-2BC3-4D4F-8CDB-20D0228C69B4.jpeg
68435CE6-B3DB-4561-8D3D-B3A4894A6BF3.jpeg
06E81F1A-A42E-476E-8D40-339643E281B6.jpeg
RaptorMachine
Posts: 40
Joined: Wed Aug 14, 2019 11:29 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: many
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes
Location: New Jersey
Contact:

Re: Bridgeport Interact 412

Post by RaptorMachine »

beautiful job !
Post Reply