Page 1 of 1

Omnitech Selexx Pal 2003 Router

Posted: Thu Jan 12, 2023 7:36 pm
by repauli1
10hp spindle 24,000 rpm
3hp 9 drill head
8 tool unbrella ATC
1.8KW DYN SERVOS X/Y
Centroid Oak with 2 1616 plc expansion boards
M400 operator console
Wireless MPG
5X10 TABLE

LINK TO BUILD PHOTOS FINISHED PRODUCT AT END
https://photos.app.goo.gl/KEPZRRuZK7KZEhwZA

Re: Omnitech Selexx Pal 2003 Router

Posted: Mon Jan 23, 2023 6:02 pm
by cnckeith
sweet! what a project!

Re: Omnitech Selexx Pal 2003 Router

Posted: Mon Jan 23, 2023 7:14 pm
by ShawnM
I've looked at a few of those at various auctions, they are nice machines. I'm looking for a 5x10 now for a retrofit.

Re: Omnitech Selexx Pal 2003 Router

Posted: Fri Jan 27, 2023 4:58 pm
by Exhibitology
Anderson make nice machines. This one look like its new.

How have you incorporated the "V" drill bank.

I converted an SCM pod and rail cabinet machine to Centroid Oak. It had Yaskawa servos so it wasn't so difficult. I wired it so that I can use the drills in the "V" drill bank individually. Same with the horizontall drills and saw. I never bothered to make them work together as seperate tools registered to one another.

I never learned to write the code that gives a tool a different XY offset from another tool.

We're you able to achieve it. Was it difficult.

Rich