Omnitech Selexx Pal 2003 Router

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
repauli1
Posts: 156
Joined: Thu Jul 09, 2020 9:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Omnitech Selexx Pal 2003 Router

Post by repauli1 »

10hp spindle 24,000 rpm
3hp 9 drill head
8 tool unbrella ATC
1.8KW DYN SERVOS X/Y
Centroid Oak with 2 1616 plc expansion boards
M400 operator console
Wireless MPG
5X10 TABLE

Customer using table to mill lead sheets used to line xray-catscan, MRI equipment

LINK TO BUILD PHOTOS FINISHED PRODUCT AT END
https://photos.app.goo.gl/KEPZRRuZK7KZEhwZA
Attachments
20220102_132038.jpg
Last edited by repauli1 on Wed Feb 22, 2023 7:36 am, edited 1 time in total.
cnckeith
Posts: 6928
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Omnitech Selexx Pal 2003 Router

Post by cnckeith »

sweet! what a project!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
ShawnM
Posts: 2153
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: Omnitech Selexx Pal 2003 Router

Post by ShawnM »

I've looked at a few of those at various auctions, they are nice machines. I'm looking for a 5x10 now for a retrofit.
Exhibitology
Posts: 45
Joined: Sun Apr 28, 2013 9:19 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 1218120647
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Newark, NJ
Contact:

Re: Omnitech Selexx Pal 2003 Router

Post by Exhibitology »

Anderson make nice machines. This one look like its new.

How have you incorporated the "V" drill bank.

I converted an SCM pod and rail cabinet machine to Centroid Oak. It had Yaskawa servos so it wasn't so difficult. I wired it so that I can use the drills in the "V" drill bank individually. Same with the horizontall drills and saw. I never bothered to make them work together as seperate tools registered to one another.

I never learned to write the code that gives a tool a different XY offset from another tool.

We're you able to achieve it. Was it difficult.

Rich
Post Reply