Hello Guys
Currently completed CNC Pipe bending with Centroid Oak.
For any professional CNC retrofit and consultancy please contact
aamirzaheer4@yahoo.com
Aamir Zaheer
CNC Pipe Bending with custom made NC software
Moderator: cnckeith
-
- Posts: 98
- Joined: Fri Jun 10, 2011 8:31 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
CNC Pipe Bending with custom made NC software
Last edited by aamir on Tue Dec 13, 2022 12:54 pm, edited 1 time in total.
-
- Posts: 26
- Joined: Fri May 20, 2022 6:53 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Classified Information
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Belgium
Re: CNC Pipe Bending with customer software
Awesome
The video even made me bend my head
maybe a pneumatic cylinder to automaticly close the hatch at the end
I'm impressed
Yelleke
The video even made me bend my head
maybe a pneumatic cylinder to automaticly close the hatch at the end
I'm impressed
Yelleke
There are no stupid questions.
There are only stupid answers.
There are only stupid answers.
-
- Posts: 98
- Joined: Fri Jun 10, 2011 8:31 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: CNC Pipe Bending with customer software
Sorry I m not good at camera work .
Yes there is a cylinder but it's not in good shape need to repair it.
Thanks
Yes there is a cylinder but it's not in good shape need to repair it.
Thanks
-
- Posts: 2230
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: CNC Pipe Bending with custom made NC software
Great job Aamir, very impressive for sure. Thanks for sharing.
-
- Posts: 7325
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC Pipe Bending with custom made NC software
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html