Clearpath 48x48 router close to finalized. Custom built electronics enclosure

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
PrismAerospace
Posts: 1
Joined: Mon Oct 31, 2022 4:19 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0035FF8A192E-0813203625
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Clearpath 48x48 router close to finalized. Custom built electronics enclosure

Post by PrismAerospace »

After finding the pre built router on marketplace for a deal to good to pass up, I was launched into the world of centroid.

The router itself was completely built, all the rails had already been aligned, you could blow on the gantry and move it. The wiring however was a disaster. Profession is Aircraft wiring so I had to blow this part out of the box.

components as follows:

Centroid ACORN
Centroid Either1616
CNC4pc C86ACCP
(CNC S30S On order)
ABB ACS VFD

I just finished the vacuum table consisting of a 10hp Regen Blower at 575CFM at 18"Hg across the entire 4x4 table I can place a 6"x6" plate anywhere and need a wedge to remove it. Currently I have not had a single sheet come loose to date.

I would love to hear some feed back!
Attachments
Screen Shot 2022-10-31 at 1.54.15 PM.png
299319580_3070579269831189_3697084440521749356_n.jpg
299037159_3070579243164525_7145265969944682019_n.jpg
297819024_3070579109831205_7425252036474752733_n.jpg
IMG_1527.jpeg
IMG_1526.jpeg
68894121797__15233C2C-575E-43C0-9DD5-09834007344A.jpeg
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Clearpath 48x48 router close to finalized. Custom built electronics enclosure

Post by martyscncgarage »

Wow, nice work.
Those are some serious "beer can" capacitors!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
TheKitMill
Posts: 153
Joined: Wed Sep 06, 2017 1:52 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Clearpath 48x48 router close to finalized. Custom built electronics enclosure

Post by TheKitMill »

That is a beautiful Cabinet Nice job
krissondors
Posts: 54
Joined: Sun Apr 26, 2020 10:28 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: SoCal

Re: Clearpath 48x48 router close to finalized. Custom built electronics enclosure

Post by krissondors »

That's so cool! Love the build! Thanks for sharing
Post Reply