Hello Guys
Finish Hurco BMC25 with Acorn .
https://youtube.com/shorts/HvSV0ad-KXc?feature=share
Aamir
Hurco BMC25 with Acorn
Moderator: cnckeith
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Hurco BMC25 with Acorn
Nice work Aamir,
It would be very helpful if you described the motors and drives used, including make/model number for others.
It would be very helpful if you described the motors and drives used, including make/model number for others.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 109
- Joined: Sat Oct 06, 2018 9:35 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Hurco BMC25 with Acorn
I'd be very interested in knowing how you are liking the acorn control.aamir wrote: ↑Wed Aug 03, 2022 5:03 am Hello Guys
Finish Hurco BMC25 with Acorn .
https://youtube.com/shorts/HvSV0ad-KXc?feature=share
Aamir
Did you have a specific reason for going that direction instead of the oak board?
-Joel
-
- Posts: 99
- Joined: Fri Jun 10, 2011 8:31 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Hurco BMC25 with Acorn
Well the precision of the customer is under 50micron and normally the open loop max Handel that band .
Customer has a cost constraint that's why I go to acorn.
If u ask me oak is the best solution for such type machine.I prefer closed loop strategy
Customer has a cost constraint that's why I go to acorn.
If u ask me oak is the best solution for such type machine.I prefer closed loop strategy