Page 1 of 1
Auto Sanding head for Acorn Controlled Router
Posted: Sat Jul 16, 2022 9:39 am
by TheKitMill
https://youtube.com/shorts/gDegDvHIpU4?feature=share
First test run of Floating Sanding heed on Acorn Equipped CNC Router
Re: Auto Sanding head for Acorn Controlled Router
Posted: Sat Jul 16, 2022 3:06 pm
by Sword
Nice! Is it slightly spring loaded or just set at height?
Re: Auto Sanding head for Acorn Controlled Router
Posted: Sun Jul 17, 2022 10:31 am
by TheKitMill
The Head is Spring Loaded and the tension can be adjusted with stronger or weaker springs.
So far the medium tension springs is working well but a different spring might work better for polishing
Still testing for best spring load for the Grit being used. I am having custom paper being made that will help it float better over the edges.
Designed to work with and .625 Collet Holder, Non ATC or ISO 30 , cat 40 or HSK if your spindle can hold a .625 tool it will work.
https://youtube.com/shorts/jeB3kWipJ50?feature=share