Deckel Maho GRC 500C with T400 Using Existing Indrament

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
aamir
Posts: 96
Joined: Fri Jun 10, 2011 8:31 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Deckel Maho GRC 500C with T400 Using Existing Indrament

Post by aamir »

Hello Guys
Just completed a Professional Retrofit Deckel Maho GRC500C with existing Indrament axis and spindle Drive .



For Professional Retrofit and consultancy contact aamirzaheer4@yahoo.com
Thanks
Aamir Zaheer

cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Deckel Maho GRC 500C with T400 Using Existing Indrament

Post by cnckeith »

nice clean install, thanks for sharing!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply