Hello Guys
Just completed a Professional Retrofit Deckel Maho GRC500C with existing Indrament axis and spindle Drive .
For Professional Retrofit and consultancy contact aamirzaheer4@yahoo.com
Thanks
Aamir Zaheer
Deckel Maho GRC 500C with T400 Using Existing Indrament
Moderator: cnckeith
-
cnckeith
- Posts: 6229
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Deckel Maho GRC 500C with T400 Using Existing Indrament
nice clean install, thanks for sharing!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html