Rigid tapping Setup with video
Moderator: cnckeith
-
- Posts: 2076
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Rigid tapping Setup with video
Maybe useful for someone...
My Setup for rigid tapping
Servo Driver 0.1s deceleration and acceleration time
Parameters in Acorn
0.25s acceleration for z-axis in the Wizard
P36 - 1
P37 - 0.1
P68 - 800
P69 - 0.2 (lower produced some overshoot)
P82 - 45
P143 - 1
P240 - 0.5 (for a metric setup)
P241 - 10
works ok for tapping in the 800-2000rpm range with my cheap Closed Loop Steppers
Direction change in the hole (especially from 2000-0 rpm) could be faster for my taste but found no way to speed this up further
Uwe
My Setup for rigid tapping
Servo Driver 0.1s deceleration and acceleration time
Parameters in Acorn
0.25s acceleration for z-axis in the Wizard
P36 - 1
P37 - 0.1
P68 - 800
P69 - 0.2 (lower produced some overshoot)
P82 - 45
P143 - 1
P240 - 0.5 (for a metric setup)
P241 - 10
works ok for tapping in the 800-2000rpm range with my cheap Closed Loop Steppers
Direction change in the hole (especially from 2000-0 rpm) could be faster for my taste but found no way to speed this up further
Uwe
Last edited by suntravel on Mon Jul 11, 2022 5:13 pm, edited 1 time in total.
-
- Posts: 7411
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Rigid tapping Setup
Uwe,
Hello. nice work as usual! thanks for sharing.
would be great to pan the camera over to the Acorn CNC12 screen during these demos to prove that its an Acorn that is running the show:-))
Hello. nice work as usual! thanks for sharing.
would be great to pan the camera over to the Acorn CNC12 screen during these demos to prove that its an Acorn that is running the show:-))
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2076
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Rigid tapping Setup
If it would be Linux CNC I have had to talk 15min how difficult rigid tapping was to set up, an then looking at the slow tapping I would fall asleep
But ok next video with Acorn screen and the complete single line of programming in Intercon
Uwe
-
- Posts: 7411
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Rigid tapping Setup
thanks!! looking forward to it.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 64
- Joined: Wed Feb 27, 2019 11:09 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804738481A4 0130191589.
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: Rigid tapping Setup
Is like a siemens controller.
-
- Posts: 7411
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Rigid tapping Setup
love the rigid tapping! snappy!
nice work on this cool little machine.
thanks for posting this great video.
nice work on this cool little machine.
thanks for posting this great video.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2076
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Rigid tapping Setup with video
Now with Peck Tapping in Stainless Steel...
Uwe
Uwe
-
- Posts: 7411
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Rigid tapping Setup with video
love it! great video. thanks for posting.
ps. nice reset button.
ps. nice reset button.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html