Re: Oak Control, Yaskawa Servos, on Brand New Rigid Head Bed Mill with ATC
Posted: Thu Jan 09, 2020 6:51 pm
by jhenise
calibration of the DP4 probe
A couple shots of the finished milling machine...
Re: Oak Control, Yaskawa Servos, on Brand New Rigid Head Bed Mill with ATC
Posted: Thu Jan 09, 2020 7:02 pm
by jhenise
First parts! so far so good! rigid tapping too.
Re: Oak Control, Yaskawa Servos, on Brand New Rigid Head Bed Mill with ATC
Posted: Thu Jan 09, 2020 7:20 pm
by martyscncgarage
Nice work!
Would like to see the finished control.
Re: Oak Control, Yaskawa Servos, on Brand New Rigid Head Bed Mill with ATC
Posted: Fri Jan 10, 2020 2:27 pm
by jhenise
Hi Marty,
here are the guts of the control cabinet and computer console
Re: Oak Control, Yaskawa Servos, on Brand New Rigid Head Bed Mill with ATC
Posted: Fri Jan 10, 2020 2:35 pm
by martyscncgarage
WOW. Extremely well thought out. I trust you designed it on CAD first and then wired it up.
Nice work. Thanks for sharing the journey with us!
Marty
Re: Oak Control, Yaskawa Servos, on Brand New Rigid Head Bed Mill with ATC
Posted: Fri Jan 10, 2020 9:47 pm
by jhenise
Thanks Marty!
No CAD for the cabinet just months of staring at the parts with a marker pen and a tape measure.
The computer console parts (Page 2) were designed in CAD....
Re: Oak Control, Yaskawa Servos, on Brand New Rigid Head Bed Mill with ATC
Posted: Wed Mar 03, 2021 1:51 pm
by jhenise
running a 4 axis indexing job
Re: Oak Control, Yaskawa Servos, on Brand New Rigid Head Bed Mill with ATC
Posted: Wed Mar 03, 2021 2:11 pm
by polaraligned
Wow, that is my dream machine. Makes my Bridgeport Series II look like a toy.
Excellent craftsmanship getting that together.
Is this iron readily available for retrofit? Might I inquire as to the cost of that iron?
Best of luck with that sweet machine.
Re: Oak Control, Yaskawa Servos, on Brand New Rigid Head Bed Mill with ATC
Posted: Wed Mar 03, 2021 5:45 pm
by martyscncgarage
Very nice!
Please post a video clip running a job and panning to the console to see the control running to the Success Stories Forum!
Show pictures of the cabinet, summarize the control, the axis motor drives/motors, and Spindle Drive and spindle motor you used?
That would be great!
Marty
Re: Oak Control, Yaskawa Servos, on Brand New Rigid Head Bed Mill with ATC