Greetings,
I have been posting in the Acorn section about an Automatic Tool Change System I created for my CNC Router. I just posted a video that covers a lot of the details of the router that has been a work in progress for over 15 years. If you like tinkering with your CNC Router, I suspect you may find some useful bits of information in this video.
Most importantly, there is an explanation why I abandoned MACH 3 and switched to Centroids Acorn controller. Take a look at the video (sorry, it is long but covers a lot of concepts and ideas) and I hope you find some useful information within it.
https://youtu.be/4-pMbP0K6bw
Thanks for taking the time to let me "show off" a bit.
Chris D
DIY CNC Router recontrolled from MACH 3 to Acorn
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: DIY CNC Router recontrolled from MACH 3 to Acorn
Excellent work Chris!
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ