G0704 Centroid Acorn Build

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
CivilCNC
Posts: 19
Joined: Wed Apr 07, 2021 11:16 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: will obtain

G0704 Centroid Acorn Build

Post by CivilCNC »

[First off thanks everyone on Facebook for helping me with whatever questions I've had so far. Figured I'd post this as a success story, now that the mill is complete. The only thing left to do is install limit switches for the new owner per his request.

G0759 mill
HeavyMetal CNC kit
Stepper online closed loop nema24 X/Y nema 34 Z
Centroid acorn

---Thanks, JAKE

:mrgreen: :mrgreen: :mrgreen:
20210415_214312.jpg
20210322_181902.jpg
20210330_073539.jpg
20210415_214312.jpg
20210414_005756.jpg
Attachments
20210304_004247.jpg
martyscncgarage
Posts: 8991
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: G0704 Centroid Acorn Build

Post by martyscncgarage »

Nice work Jake!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
BDubs
Posts: 38
Joined: Sun Dec 24, 2017 11:49 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none
Contact:

Re: G0704 Centroid Acorn Build

Post by BDubs »

Looks great! What are you using for a spindle motor?
Brady Watson | IBILD Solutions | Production Consultant | HiDef 3D Laser Scanning | Vectric Custom Video Training | IBILD.com
CivilCNC
Posts: 19
Joined: Wed Apr 07, 2021 11:16 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: will obtain

Re: G0704 Centroid Acorn Build

Post by CivilCNC »

BDubs wrote: Tue Jul 13, 2021 6:17 am Looks great! What are you using for a spindle motor?
Sorry for the late reply! The spindle motor was the stock motor, it didn't have spindle control unfortunately
Post Reply