Emco Pc turn 50

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
Gordon1234
Posts: 45
Joined: Mon May 18, 2020 2:27 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Emco Pc turn 50

Post by Gordon1234 »

Hello everyone.

Retrofit done on Emco pc turn 50 with turret !

1st test part done.

Big thanks to Marty !

Image

No vids but next time, when threading, drilling...
Post Reply