Emco Pc turn 50

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
Gordon1234
Posts: 45
Joined: Mon May 18, 2020 2:27 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Emco Pc turn 50

Post by Gordon1234 »

Hello everyone.

Retrofit done on Emco pc turn 50 with turret !

1st test part done.

Big thanks to Marty !

Image

No vids but next time, when threading, drilling...
martyscncgarage
Posts: 8980
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Emco Pc turn 50

Post by martyscncgarage »

Nice! Be sure to post a video on YouTube and share a link here. Pictures of your machine would be nice!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply