First test router retrofit using acorn and cnc12

Post your completed retrofits for the world to see.

Moderator: cnckeith

tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: First test router retrofit using acorn and cnc12

Post by tblough »

You get one WCS with free (G54), six with Pro (G54-G59), and 18 with Ultimate. Sounds like you only have Acorn Pro.

Upgrade to Acorn Ultimate then you can access the additional WCSs with G54 P1 through G54 P12, or G54 Etc through G54 E18.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
noel-nogal
Posts: 84
Joined: Sat Feb 20, 2021 12:37 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: (2669)
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: First test router retrofit using acorn and cnc12

Post by noel-nogal »

you re' right, i only have Acorn pro, reading the manual i found that with an extra cost, will get the rest of the WCS, also found the information in the centroids website. thanks
Post Reply