Another success story

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
Arthur
Posts: 37
Joined: Sat May 16, 2020 12:09 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: A81087C2F400-0530192077

Another success story

Post by Arthur »

Hello all,

I would like to report another DIY success story.

Core components list:

1 X Acorn CNC control kit by Centroid
4 X SDSK CPM-SDSK-3421S-ELS by Teknic
1 X JGL-100/3.2R24 spindle by Jianken
1 X Sunfar E550 VFD by Simphoenix

Work envelope:

X Axis 1100 mm
Y Axis 1800 mm
Z Axis 200

Chassis:

Custom designed, utilizing Item aluminum profiles and Fusion 360.

Thank you all for your support!

P.S. If anyone happened to use above listed components experiencing difficulties, don't hesitate to reach out.
Screen Shot 2021-04-13 at 2.36.00 PM.png
cnckeith
Posts: 3311
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Another success story

Post by cnckeith »

cool! thanks for posting, interested to learn more do you have a photo album link so we can check out the machine? looks like a nice low cost diy design.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Arthur
Posts: 37
Joined: Sat May 16, 2020 12:09 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: A81087C2F400-0530192077

Re: Another success story

Post by Arthur »

Hi Keith, I'll be posting some photos and videos right after I sort out my garage :)
Post Reply