CNC Surfboard, Windsurf and SUP board Shaping Machine Success.

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

CNC Surfboard, Windsurf and SUP board Shaping Machine Success.

Post by cnckeith »

Its been three years and many many CNC custom boards created since Quatro upgraded their big CNC board shaping machine with a Centroid Acorn CNC controller. The Centroid CNC features, system reliability, and support have allowed them to concentrate more of their energies into the design of their products pushing the state of the art in board shapes into the future.

CNC system:

Acorn CNC controller, Pro Router license, Centroid NUC CNC PC, Delta AC servo drives. Wired as per the Acorn to Delta Schematic and used the stock Acorn to Delta Wizard drive type configuration.

G code is generated by Shape 3D, and Centroid Smoothing is applied for nice smooth machine cutting action
Attachments
quatro kia lip.jpg
PXL_20210401_013410205.jpg
23769.jpg
23708.jpg
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply