Building CNC plasma/Mill Combo and 2nd Router

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
Weld ON
Posts: 1
Joined: Tue Feb 23, 2021 5:01 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Building CNC plasma/Mill Combo and 2nd Router

Post by Weld ON »

Hello guys ,

I will like to share my work . Im making 2 CNC machine one will be 2.4m x 1.5m and will be combo Plasma and Mill is made of old stile 100x100mm profile.

Second CNC will be just router 5-6 axis with tools changer made of 80x80 .

I will try to test all best controllers for my needs . Stay tune and let me know what you think about it ... Thanks guys ..


http://youtu.be/channel/UCNmOINTaJ1jUHMGe7ql2bQg/videos








Image Image Image Image Image Image
Post Reply