Mx-210V 8x16” lathe closed loop ihss57 steppers
Posted: Sat Feb 06, 2021 12:32 pm
https://vm.tiktok.com/ZMeeVW9FW/
This is 1st no load test.
https://vm.tiktok.com/ZMeeVtmkT/
Mechanical build
https://vm.tiktok.com/ZMeeqemc1/
Pawn with 1/4” clearance on z and x for a no crash outcome
I know the pawn was not completed but as you will see the results with those sanding done it was pretty awesome!
This is 1st no load test.
https://vm.tiktok.com/ZMeeVtmkT/
Mechanical build
https://vm.tiktok.com/ZMeeqemc1/
Pawn with 1/4” clearance on z and x for a no crash outcome
I know the pawn was not completed but as you will see the results with those sanding done it was pretty awesome!
