Mx-210V 8x16” lathe closed loop ihss57 steppers

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
diytoolU
Posts: 2
Joined: Fri Feb 05, 2021 4:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: c147357

Mx-210V 8x16” lathe closed loop ihss57 steppers

Post by diytoolU »

https://vm.tiktok.com/ZMeeVW9FW/

This is 1st no load test.

https://vm.tiktok.com/ZMeeVtmkT/

Mechanical build

https://vm.tiktok.com/ZMeeqemc1/

Pawn with 1/4” clearance on z and x for a no crash outcome

I know the pawn was not completed but as you will see the results with those sanding done it was pretty awesome!
C3677977-1761-4065-A30C-D0B6FE00048E.jpeg
2AE3C2A2-B1D3-49A9-A115-D06AF29B4589.jpeg
diytoolU
Posts: 2
Joined: Fri Feb 05, 2021 4:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: c147357

Re: Mx-210V 8x16” lathe closed loop ihss57 steppers

Post by diytoolU »

That was supposed to read without sanding. :roll:
martyscncgarage
Posts: 8260
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Mx-210V 8x16” lathe closed loop ihss57 steppers

Post by martyscncgarage »

Nice work!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply