DynaMyte 2800 Bed Mill

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
Pete Rondeau
Posts: 33
Joined: Thu Oct 03, 2019 12:59 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: South Central Pennsylvania
Contact:

DynaMyte 2800 Bed Mill

Post by Pete Rondeau »

I think I can finally say that this project is complete. My DynaMechatronics 2800 has been a 7 year project after buying it as a basket case at the Cabin Fever Auction. (I only really dove into it the last year though) The entire process has been documented on my YouTube channel.
Attachments
dynamyte_clean.jpg
Follow my progress on YouTube
martyscncgarage
Posts: 8237
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: DynaMyte 2800 Bed Mill

Post by martyscncgarage »

And a very good Video Logging process you did!
Thanks Pete!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cnckeith
Posts: 3295
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: DynaMyte 2800 Bed Mill

Post by cnckeith »

cool post a link to your youtube channel!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply