Old Techno Isel Rebuild

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
MountainMetal
Posts: 22
Joined: Sun Dec 20, 2020 6:47 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Old Techno Isel Rebuild

Post by MountainMetal »

This is an old machine that ran in the Case Knife factory in Bradford, Pa. Cutting knife sides was its only job. Bought from a guy in Bradford a couple of years ago and just got around to upgrading with Centroid Acorn and Clear Path motors. Obviously I have to refine some motor settings. Hope to make some dust this weekend. Vids are of the first runs. Finally got some grease to the bearings. They are quieter now.

Attachments
Control box 1.jpeg
Techno Old Controls.jpeg
Techno b 4.jpeg
martyscncgarage
Posts: 8441
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Old Techno Isel Rebuild

Post by martyscncgarage »

Congrats on the build!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cnckeith
Posts: 3357
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Old Techno Isel Rebuild

Post by cnckeith »

right on! thanks for posting! looking forward to seeing chips flying videos!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
MountainMetal
Posts: 22
Joined: Sun Dec 20, 2020 6:47 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Old Techno Isel Rebuild

Post by MountainMetal »

Couldn't wait, had to make the first chips before I was completely finished. Think I'll keep it. I can see ATC soon. First chips this machine has seen in a long time. Could find my large hold downs.

FYI - CNC12 Router - 1/4" in 2 flute bit, 14,0000 rpm at 140ipm. .15" stepover and .15" depth of cut, Went easy being first cut.

cnckeith
Posts: 3357
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Old Techno Isel Rebuild

Post by cnckeith »

sweet! can't wait to see more action...
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply