Funcionamiento CNC

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
Oswaldo
Posts: 27
Joined: Wed Jul 25, 2018 1:33 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
CNC Control System Serial Number: Acorn180322
Contact:

Funcionamiento CNC

Post by Oswaldo »

For me it is very pleasant, to share the videos that I have already made with the ACORN Card Operation, the fight was memorable due to my short knowledge of electronics. There are some details that I need to correct but overall I am very satisfied with the results.
Thanks Marty, swiss, Gary, Daniel.
I attach the links where you can see the videos.
Sincerely;

Oswaldo.



Para mi es muy placentero, compartir los videos que he realizado ya con el Funcionamiento De la Tarjeta ACORN, la lucha fue memorable por mis cortos conocimientos de electrónica. Hay algunos detalles que debo corregir pero en general estoy muy satisfecho con los resultados.
Gracias Marty , swiss , Gary , Daniel.
Adjunto los links donde se pueden ver los videos.
Atentamente;
cnckeith
Posts: 2919
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Funcionamiento CNC

Post by cnckeith »

great! thanks for posting.
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply