G0602 conversion with DMM servo spindle

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
DanielCA92563
Posts: 34
Joined: Fri Oct 13, 2017 1:23 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

G0602 conversion with DMM servo spindle

Post by DanielCA92563 »

Finally got around to finishing my G0602 CNC conversion. Everything seems to be working well. I used BDtools G0602 conversion kit for the ball screws and nuts to save time and that it definitely did.

I used a 1KW DMM servo for the spindle, works well for threading so far. Servos I used were all DMM:
1Kw 11A-DST-A6HK1
DYN4 AC Servo Drive DYN4-H01A2-00
DYN2-TLA6S-00 AC Servo Drive DYN2-TLA6S-00
NEMA23 Frame Servo, 0.4kW, 60V Class, D-Cut Shaft 57N-DHT-A6TD1
IMG_6822.JPG
IMG_6820.JPG
Here's a video of it cutting a 3/8-14 thread in 303 stainless
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: G0602 conversion with DMM servo spindle

Post by cnckeith »

cool! thanks for posting. -keith
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply