Finally got the Tormach TTS to work with Centroid

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
rflopes3
Posts: 65
Joined: Tue Jan 14, 2020 12:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 2752
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Finally got the Tormach TTS to work with Centroid

Post by rflopes3 »

Hello guys

I have finally managed to make the tormach tts to work with centroid CNC. I was struggling with that thing for ovr 2 months and finally took courage to open the device and rewired it. Turns out that I give up the LED (it just complicates and does not do anything useful) and now it is working.

Repeatability is 0.005mm. I took 10 measurements of each of my 30 tools = 300 measurements to assure that. My machine is now spot on with in 0.01mm tolerance. I am happy now.

Thanks all you guys for the help and for acorn with such a great product.
20200618_210333.jpg
20200618_210359.jpg
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Finally got the Tormach TTS to work with Centroid

Post by cnckeith »

nice, thanks for posting the photos!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply