First Titaniun cutting after acorn retrofit project

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
rflopes3
Posts: 57
Joined: Tue Jan 14, 2020 12:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 2752

First Titaniun cutting after acorn retrofit project

Post by rflopes3 »

hey guys.

Finally back to work on my knives.

The machine never been so smooth and precise.

Special rhanks go Mr Marty who had help me a lot

Image
Attachments
20200607_164830.jpg
cnckeith
Posts: 2911
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: First Titaniun cutting after acorn retrofit project

Post by cnckeith »

cool! thanks for posting!
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
AnnArborNate
Posts: 20
Joined: Mon Jun 29, 2020 6:18 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: First Titaniun cutting after acorn retrofit project

Post by AnnArborNate »

Excellent.
martyscncgarage
Posts: 6644
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: First Titaniun cutting atter acorn retrofit project

Post by martyscncgarage »

rflopes3 wrote: Sun Jun 07, 2020 3:50 pm hey guys.

Finally back to work on my knives.

The machine never been so smooth and precise.

Special rhanks go Mr Marty who had help me a lot

Image
Thanks for sharing! Would like to see one of your knives done!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
martyscncgarage
Posts: 6644
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: First Titaniun cutting after acorn retrofit project

Post by martyscncgarage »

rflopes3 wrote: Sun Jun 07, 2020 3:50 pm hey guys.

Finally back to work on my knives.

The machine never been so smooth and precise.

Special rhanks go Mr Marty who had help me a lot

Image
Thanks for sharing! Would like to see one of your knives done! (I'm assuming that's what the part is for? :D )
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
rflopes3
Posts: 57
Joined: Tue Jan 14, 2020 12:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 2752

Re: First Titaniun cutting after acorn retrofit project

Post by rflopes3 »

This is the knife ready.

That part was the frames.
Attachments
20200731_081619.jpg
martyscncgarage
Posts: 6644
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: First Titaniun cutting after acorn retrofit project

Post by martyscncgarage »

rflopes3 wrote: Tue Sep 15, 2020 10:56 am This is the knife ready.

That part was the frames.
Very nice work!
You sell them on line?
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
rflopes3
Posts: 57
Joined: Tue Jan 14, 2020 12:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 2752

Re: First Titaniun cutting after acorn retrofit project

Post by rflopes3 »

martyscncgarage wrote: Tue Sep 15, 2020 10:56 am
rflopes3 wrote: Tue Sep 15, 2020 10:56 am This is the knife ready.

That part was the frames.
Very nice work!
You sell them on line?
Marty
Yes I do but only on demand. usually I don't have knives ready to ship. The wait list is now 3 to 4 months.

Look at my instagram @t.rex_custom_knives
martyscncgarage
Posts: 6644
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: First Titaniun cutting after acorn retrofit project

Post by martyscncgarage »

👍👍
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
CNCMaryland
Posts: 61
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: F045DA7CBF8b-103011290

Re: First Titaniun cutting after acorn retrofit project

Post by CNCMaryland »

Beautiful work !!!
Post Reply