Recent upgrade to Acorn

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
needonemoretool
Posts: 19
Joined: Tue Apr 02, 2019 5:34 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: F045DA7F1944-0111191539

Recent upgrade to Acorn

Post by needonemoretool »

😁
Attachments
PSX_20200514_141338.jpg
PSX_20200514_141252.jpg
PSX_20200514_141320.jpg
cnckeith
Posts: 2911
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Recent upgrade to Acorn

Post by cnckeith »

Very cool thanks for posting the photos give us a little more info on the machines and project.
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
AnnArborNate
Posts: 20
Joined: Mon Jun 29, 2020 6:18 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Recent upgrade to Acorn

Post by AnnArborNate »

Love the lathe.
Post Reply