Finally My ZAY-7051L is Ready

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
rflopes3
Posts: 57
Joined: Tue Jan 14, 2020 12:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 2752

Finally My ZAY-7051L is Ready

Post by rflopes3 »

A few months ago I have changed my mach3 controller to acorn CNC and could not be more happy.

My machine is now ready (minor things to do only) but I can restart my knifemaking finally.

My Metrol limits are installed, probe running, all set.

The enclosure is mounted and the lights are on.

Hope you guys enjoy.
Attachments
20200420_183005.jpg
20200420_183000.jpg
20200420_182955.jpg
20200420_182940.jpg
20200417_184830.jpg
20200417_184542.jpg
cnckeith
Posts: 2911
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Finally My ZAY-7051L is Ready

Post by cnckeith »

Right on! looks great! thanks for posting!
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply